Home > Products > Medical > Endoscope Drying & Storage > Plasma Typhoon Endoscope Drying & Storage System
- Air Monitoring (5)
- Bed Pan Washers (8)
- Chloridmeters (1)
- CSSD Chemistry (9)
- CSSD Cleaning Process Monitors (4)
- CSSD Sterilisation Process Monitoring (9)
- Dental Washer Disinfectors (9)
- Endoscope Drying & Storage (6)
- Endoscope Reprocessors (6)
- Endoscope Transport (2)
- Endoscopy Accessories & Consumables (25)
- Filtered Storage Cabinets (2)
- Ice Makers (2)
- Instruction For Use (IFUs) Database (1)
- Instrument Tracking (3)
- Medical Freezers (1)
- Medical Steam Cleaners (2)
- Osmometers (5)
- Probe Cleaning & Disinfection (5)
- Reverse Osmosis Water Systems (12)
- Steam Sterilizers (8)
- Storage Cabinets (8)
- Suppository Applicators (3)
- Thermal Sealer Units (7)
- Ultrasonic Cleaners (9)
- Washer Disinfectors (16)
Plasma Typhoon Endoscope Drying & Storage System
Super Fast Endoscope Drying & Storage System
Plasma Typhoon showcases rapid drying capabilities using warmed medical grade air within 2 minutes and 30 seconds. Completely dry internal channels of your endoscope and enjoy compatibility with a variety of gastroscopes, colonoscopes, EUS ultrasound endoscopes, duodenoscopes, bronchoscopes (inc. paediatric) and cystoscopes. Plasma Typhoon is the perfect compact solution for drying scopes during the day, between use and/or prior to overnight storage.
Validated, Versatile & Safe
Plasma Typhoon is validated for use with Olympus, Pentax, Fujifilm, Storz, Wolf and Fuse endoscopes. The unit is ideal to support existing drying protocols or as a standalone unit for those short on space. Operating via a compressor or gas cylinder and utilising the advanced properties of medical grade air, PlasmaTyhpoon takes just 6 seconds to store your scope! The scope is placed in an air-tight sealable bag which is then injected with activated air (plasma) that disinfects the entire surface of the scope. The scope is validated for storage up to 1 month, however current guidelines in New Zealand allow scope storage for up 7 days.
Full Electronic Traceability Included
Record and store both user and endoscope barcode data with Plasma Typhoon’s full electronic traceability as standard inclusion. Data is saved via SD card in CSV format, while the printer outputs a sticker label to capture storage compliant information such as date and time of treatment, Scope ID, User ID, Validation of treatment parameter values, Cycle completed successfully (drying and or storage according to cycle selection), and storage validity. This label is then placed on the outside of the scope bag, offering complete transparency of operations and processing for the end user
EN 16442 Compliant – Proven & Tested
The Plasma Typhoon has been heavily tested and medically certified by Biotec-Germande, leaders in medical device testing and validation throughout the world. European markets have been using Plasma Typhoon for over two years, including recent medical site acquisitions in Switzerland and the UK. The unit is certified by Biotech-Germande NF EN 16442 norm up to 744 storage hours. Cold plasma has a broad antimicrobial application that is well documented in the food industry to prolong shelf life and minimise perishables. It is safe for decontaminating surfaces without adverse effect on user or the surface itself.
Tiny Footprint – Only 25cm Wide!
Weighing in at only 7kg and with a slim width of just 25cm, you can say goodbye to space constraints associated with traditional drying cabinets!
Easy startup; plug and play
Enjoy hassle-free set-up, with the unit requiring just two standard electrical sockets for operation; one for the base unit and one additional for the printer. Once it has been connected to power and minimum gas pressure at the inlet of 3 bar, the Plasma Typhoon is ready for use. Minimise consumption of electricity, medical air and space with this innovative drying solution.
Request your FREE Trial
Plasma Typhoon is ARTG registered, click here to request a copy of the TGA certificate.